Fix My iPhone – iPhone Water Damage Repair #iphone #5 #screen #repairs, #ipad #repair, #iphone #repair, #iphone #repair #london, #iphone #repair #service, #iphone #screen #repair, #iphone #screen #replacement, #ipod #repair, #ipod #repair #london, #iphone #5 #repair, #iphone #5 #screen #repair, #iphone #4s #repairs, #iphone #4s #screen #repair, #iphone #4s #repair, #iphone #4s #repair #london, #fix #my #iphone.


#

Water Damaged iPhone Repair

All prices include parts, labour and VAT

We specialise in water damage iPhones. There is a good chance that we can get your iPhone back to life even in the worst case of water damage.

Some of the iPhone we have bought back to life include the following:

  • Dropped into the toilet
  • Dipped in the Sea
  • Babys sucking on the end of an iPhone
  • iPhones that have been through a full wash cycle
  • iPhones in beer glasses (best to use cocktail umbrella to brighten up your pint!)

Usually water damaged iPhone just need a new battery but sometimes it can be more sinister. If you have a water damaged iPhone, walk in or post it to us for further evaluation.

We will not charge you if we cannot repair your iPhone and we will always let you know how much the repair will cost before go ahead and do the work.

Water damaged phones usually take between 2-3 days to test due to the nature of the damage.

Copyright 2017. Smart Phone Technologies Ltd, 10 Northburgh Street, London EC1V 0AT


Allen Garage Door Repair – Allen, TX #allen, #texas, #garage, #doors, #repair, #installation, #track, #roller, #repairs, #opener, #broken, #fix, #residential, #tx, #emergency, #broke, #off #track, #overhead #repair, #overhead #garage #door, #overhead #doors, #sensors, #remotes, #springs, #torsion #spring, #extension #spring #repair, #broken #spring #replacement, #replace, #lube, #install.


#

Welcome to Our Garage Door Company!

Our Garage Door Company is here to make sure that your garage door operates beautifully. Whether you need repair, replacement or installation help, we have you covered. Locals love our already-affordable prices, but they also appreciate that we frequently offer coupons and promos. Give us a call for a free price estimate or consultation.

Commercial Door Repair

We provide affordable prices for commercial garage door repair.

Gate and Gate Operator Repairs

Our team provides prompt service for those who need gate repairs. If your rolling gate is stuck, we can fix it.

The Best Deals

See our great prices for yourself. Request a cost estimate and ask us about current discounts.

Experienced Technicians

We have years of experience providing garage door repairs and installation services.

Garage Door Service in Allen, TX

What do you look for in a local business? Perhaps one that is reliable, affordable and that acts with a sense of urgency? If this describes what you are looking for, then Allen Garage Door wants to help you! We are here to fix broken garage doors and parts in Allen, TX. We are here to provide garage door installation so that you can enjoy your new, beautiful or even custom garage door.

We provide everything you need:

  • broken overhead garage door springs fixed
  • garage door section and panel replacement
  • motor repair
  • installation of custom garage doors
  • 25-point safety inspection
  • replacement and repair of springs
  • repair replacement of garage doors and all parts
  • molding replacement with vinyl weather seal
  • wood garage door installation
  • garage door opener repair, replacement and installation

Best of all, you don t have to worry about which brand you have, because we work with all of them:


How to Fix a Stopper That Doesn t Seal: 10 Steps (with Pictures) #fix #sink


#

How to Fix a Stopper That Doesn’t Seal

When parts of a stopper begin to wear out, the stopper cannot get a tight seal, which will cause sinks and tubs to leak. Losing this water can be frustrating, time-consuming and wasteful. The purpose of a stopper, after all, is to stop the water from draining. If the water drains anyway, the stopper is pretty useless. There is no need to call a professional plumber for this sort of home repair and maintenance. Fix a stopper that doesn’t seal with a little preparation and basic tools, and keep the water in a sink or tub as you intended.

Steps Edit

Method One of Two:
Fixing a Sink Stopper That Does Not Seal Edit

Check the pop-up mechanism under the sink. Use a flashlight, since most areas under sinks are dark, and visibility is minimal. The stopper can be found under the clevis strap. Push and pull on the stopper so that it goes up and down, as the stopper would in a sink.

Look for the pivot rod. This will be a narrow rod that is held in place with a spring clip. It should fit inside the clevis strap and poke through a hole.

Remove the pivot rod. Pinch the spring clip to release the rod. Adjust it inside the clevis strap to a different hole than the one it was in.

Attach the pivot rod back into the clevis strap, using the spring clip to hold it in place. This should ensure a thorough seal.

Adjust the lift rod. Loosen the clevis screw, which is found behind the clevis strap. Push up on the lift rod to turn it clockwise until it is tight. Spray the screw and the rod with lubricant if it is difficult to turn them.


How to recover a damaged MS SQL Server database? #repair, #mdf, #file,, #mdf, #sql, #server, #recovery, #tool, #microsoft, #database, #ms, #fix, #recover, #recovery, #restore


#

MS SQL database recovery software

Recovery Toolbox for SQL Server (download ) is a comprehensive recovery solution for damaged MS SQL Server database files.

Features of the MDF Recovery software:

  • Recover unreadable databases with the Suspend state
  • Fix corrupted SQL Server databases from different versions of Microsoft SQL Server: SQL Server 7/2000/2005/2008/2008 R2/2012/2014
  • Recover the most important and valuable elements of MS SQL databases: data types, table data, views, stored procedures, custom functions, triggers, indexes, primary and foreign keys, restrictions and more
  • Recover databases split into several files (*.mdf + *.ndf)
  • Fix damaged partition tables during the recovery of mdf files
  • The SQL MDF Recovery software can export the recovered data directly onto a Microsoft SQL Server
  • Save the recovered data as SQL scripts on a hard drive
  • Export data directly to a new database
  • Select specific data for saving
  • Perform a recovery of an SQL Server running Windows 98/NT 4.0/2000/Me/XP/Vista/7/8/10/Server 2008/Server/2012
  • MS SQL database recovery software includes a multi-language interface with 14 languages
  • Preview of the recovered objects and data from a corrupted MDF file

The MDF fix tool helps fix database errors:

  1. SQL Server Page Level Corruption
  2. SQL Server Table Corruption Error
  3. Database consistency errors reported by DBCC CHECKB
  4. Corruption on data pages
  5. Metadata corruption Error
  6. The header for the file ‘filename.mdf’ is not a valid database file header.

A deeply optimized SQL Server recovery tool that is capable of repairing all types of database damage and *.mdf file corruption.

Requirements: Windows 98 or above

Select a corrupted database in MS SQL Server format to repair data from

Analyze of system information from corrupted database

Preview the data, that can be retrieved from corrupted files with *.mdf extension


How to Fix a Leaky Faucet (with Pictures) #how #to #fix #a #leaky #hose #faucet


#

How to Fix a Leaky Faucet

The annoying drip of a leaky faucet can cause higher water bills and irritation. Fortunately, it’s easy to fix yourself if you can identify the type of faucet and get the necessary tools for the job. Why pay a plumber when you can fix a leaky faucet yourself? To fix leaks on the four most common types of faucet, follow these instructions.

Steps Edit

Part One of Five:
Getting Started Edit

Turn off the water to your faucet. Look underneath your sink for the pipes that run up. Along those pipes somewhere will be handles that you can turn to shut off the water to your sink. Twist clockwise to shut off.

Plug the drain. Use a sink plug if you have one or a rag. Nothing will ruin your day faster than having a screw or a washer go down the drain.

Determine what type of faucet you have. A compression faucet has two screw handles, one for hot and one for cold, and is the easiest to recognize by sight. The other three types of faucet all have one central, swiveling arm that you can swing from hot to cold as desired. [1] You may have to take your faucet apart before you know which is which, because the internal mechanisms at the base of their arms are all different:

  • A ball faucet contains a ball bearing.
  • A cartridge faucet contains a cartridge. The materials of the cartridge will vary, but handle often has a decorative cap.
  • A ceramic-disk faucet contains a ceramic cylinder.

Buy a replacement kit. Ball faucets have several parts that will need to be replaced and some that require special tools. You won’t need to replace the entire faucet, just the faucet cam assembly. All of the stuff you’ll need, including tools, should be included in this type of kit that runs about $20 and is available in the plumbing section of most home repair shops.

Start by unscrewing and removing the handle. Lift off the handle and place it aside.

Use pliers to remove the cap and collar. Also, loosen the faucet cam by using the tool provided in your replacement kit for this purpose. Remove the faucet cam, washer, and ball.

  • This will look like a “ball and socket” joint in your body–a movable (usually white) rubber ball plugs the socket, stopping up the water and releasing it.

Remove the inlet seals and springs. To do this, you will need to reach into the mechanism itself, probably using needle-nose pliers.

Replace the O-rings. Cut off the old ones and coat the new ones in plumber’s grease before installing.

Install new springs, valve seats, and cam washers. These should all be included in your kit, and should be essentially the reverse of the process you completed.

While my faucet has two handles, they do not have a top that I can remove (hot/cold). They have a very small hole on each side of the faucet, but I have no idea what tool to use. What kind of faucet is this?

Answered by wikiHow Contributor

  • From your description, it could be the compression faucet type and that “small hole” on either side of the two handles is indicative of where to begin to unscrew them.

What can I do if my water faucet outside for the garden drips?

Answered by wikiHow Contributor

  • Replace the O-ring inside of it, it’s probably very old. If that doesn’t work you can actually get a valve that goes over top of your outdoor faucet that is fail safe.

What if there are no turn off valves under sink?

Answered by wikiHow Contributor

  • Find the main valve of the water coming to your apartment or house an shut it off. You’ll have no water in the whole residence for the duration of the repair.

The stem won’t come out. How can I get it out?

Answered by wikiHow Contributor

  • You can try putting the handle back on, tighten the set screw and pull up on it; or use lubricating oil to soften up rust buildup between stem and stem housing and then pull it up. You may have to get aggressive with channel locks and pull the stem out; however, that may damage the handle stem. Lastly, before you put a new stem in, wipe inside the stem valve to remove any rust or slime, then open the shut off valve to allow water to just bubble over the top for 10 seconds. This removes debris that will get up inside your faucet line and seriously reduce your water flow.

I removed the screw on a compression faucet handle, but the handle still doesn’t come off. What is holding it on, and how do I get it off?

Answered by wikiHow Contributor

  • If you have an older faucet and it has calcium building up, that has the potential to cement the handle to the fixture. To deal with this, use Lime Away or CLR on the area to help dissolve the calcium.

Can I fix the leak without turning the water off if I have the first type of shower in the article?

Answered by wikiHow Contributor

  • Always turn the water off. It’s easier than mopping up 30 gallons of water if you do something wrong.

The type I have in my bathroom has neither holes nor caps. What can I do?

Answered by wikiHow Contributor

  • I have the same issue, no holes or side screws, but the handles are loose. I asked my hardware guy, he says these are throw away types that cannot be worked on (they’re not made to come apart). I am going to replace the faucet.

I have a pinhole leak on the top of the spigot on my kitchen faucet. How do I repair it?

Answered by wikiHow Contributor

  • You might try JB Weld and pack the hole using a Q tip, but it could be unsightly. Petroleum based fluids will clean residue off after it has set for 10 minutes. Other than that, you could just replace the faucet as the hole will most likely get bigger.

What should I do if the screw is stripped?

Answered by wikiHow Contributor

  • If the screw is stripped, then that means that it can no longer be used. Buy a new screw that fits the same dimensions of the old screw at your nearest hardware store.

For a leaky faucet, can I unscrew the tip that the water comes out of into the sink and replace a washer there?

Answered by wikiHow Contributor

  • Suppose that the washer is washed into the drain? It is best not to put unscrewed parts in the sink but on top of the counter and where they are sure to be safe.

Fix a Leaking Showerhead #fix #a #leaking #showerhead, #water #waste, #valve, #plumber, #rubber #washer, #teflon #tape, #drip, #water #supply


#

You are here: Home / Plumbing / Fix a Leaking Showerhead

Fix a Leaking Showerhead

A leaking shower head can bring on many problems. Whether you’re dripping shower head occurs while you’re taking a shower (it’s not part of the spray) or worse, when you’ve turned the faucet off, it’s definitely time to make a repair. Fortunately, this type of problem is something that homeowners can handle, with a little coaching and patience. You can fix a leaking showerhead.

The biggest issue with this kind of problem is water waste. Most of us know that water is scarce, and one of the first things we can do to conserve is stop unwanted leaks.

There are two schools of leaking shower faucets. 1) You notice water dribbling out of the shower head, down the handle and along the hose until it falls into the tub. 2) You turn the water off tightly (valves are closed), and you see and hear drip-drip-drip as water comes out of the shower head. In particular this seems to get louder at 2:00 am in the morning!

If your problem is the first one, that is water is dripping out of the shower head as you shower, this is a fairly easy repair. The most likely problem is that the washer inside the shower head tightening nut needs replacing. It’s either worn out (e.g. cracked, broken apart) or has become compromised with mineral build-up from hard water. Follow this process to remove and replace the washers.

1. You first need to loosen and remove what’s called a knurled tightening nut. This nut is the one you see that holds the shower head to the arm or shower hose. Knurled describes the type of nut. It means it is not hexagonal shaped like a regular nut. Instead, it is rounded, but grooved. Supposedly this allows you to simply grip and hand tighten it. The problem is, you usually have to use tools to REMOVE it as over time, and they can get fairly rigid and stuck. Use two wrenches; one on the arm and one on the nut. If you have a flexible shower arm, then hold that part with your hand. Just put a rag under your wrench so you don’t damage any surfaces.
2. After you’ve twisted off the nut, you should immediately see the rubber washer inside. Pry it out. Unless you have a specialized shower head, you can use a universal replacement washer from a shower head/hose repair kit. Find these kits and individual washers at your hardware store.
3. When the washer is in place, you can put everything back and tighten the knurled nut back up. Don’t forget to use plumber’s putty or teflon tape on the threading to ensure a good seal.

If you run into a problem, where you discover a lot of corrosion or other damage (perhaps it was very difficult to remove the shower head!), then it may be time to just replace the leaky shower head altogether. Take the unit to your home improvement or hardware store for their advice. They can outfit you with an inexpensive replacement.

If water is dripping from the shower head when it is turned off, you need to fix this problem because it can waste hundreds or thousands of gallons and really increase your monthly water bill. The challenge is that this problem is a little more complicated to fix then the other type of shower head leak.

The fix for this issue goes beyond the scope of this article. This is because it involves replacing the valve in your shower faucet. There are several different types and brands of valves, and yours could be any one of them. Also, the process will be different, depending on if you have a one or two-handled faucet. If you can tell the temperature of the water dripping from your shower head, it will make things easier for which valve you need to work on, hot or cold.

In any case you’ll need to turn off the water supply to fix this kind of leaking shower head problem. Your process will involve removing your valve to determine what you have. Then, referring to the brand if possible, buy a replacement valve. For standard types, you can usually do this at your local home center. For more specialty varieties, contact the manufacturer to get a replacement kit. Instructions in the kits will help you as needed.

When you’re done, make note of how you did things. Record the type of kit you purchased and parts you needed in case your leaky shower head problem returns! In that event we suggest you call in your expert plumber to assist you.

Count On Us For Plumbing

CALL 888-430-3216